YAW RATE AND ACCELERATION SENSOR (for Sedan) > REMOVAL |
| 1. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
| 3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Shift the shift lever into the N position.
Disengage the 5 clips and the claw and remove the upper console panel.
| 4. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Disengage the 3 clips and 3 claws.
Disconnect the connector and remove the console upper rear panel.
| 5. REMOVE CONSOLE BOX CARPET |
![]() |
Remove the console box carpet.
| 6. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() |
Disconnect the clamp.
Remove the 2 bolts and 2 screws.
Disengage the 4 claws and remove the rear console box.
| 7. REMOVE YAW RATE AND ACCELERATION SENSOR |
![]() |
Remove the 2 bolts and yaw rate and acceleration sensor.
Disconnect the yaw rate and acceleration sensor connector.