Home › BRAKE › BRAKE CONTROL › YAW RATE AND ACCELERATION SENSOR (for Hatchback)

YAW RATE AND ACCELERATION SENSOR (for Hatchback) > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


2. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)


C109005E01
  1. Disengage the 6 claws and remove the shifting hole cover.



3. REMOVE REAR CONSOLE BOX COVER


C109006E01
  1. Disengage the 8 claws and remove the console box rear cover.



4. REMOVE CONSOLE BOX CARPET


C109008
  1. Remove the console box carpet.



5. REMOVE REAR CONSOLE BOX ASSEMBLY


C116873
  1. Remove the bolt and disengage the 2 clips to remove the console box.



6. REMOVE YAW RATE AND ACCELERATION SENSOR


C215131
  1. Remove the 2 bolts and yaw rate and acceleration sensor.

  1. Disconnect the yaw rate and acceleration sensor connector.