Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for Hatchback Bench Seat Type)

REAR SEAT INNER BELT ASSEMBLY (for Hatchback Bench Seat Type) > REMOVAL

for Preparation Click here


NOTICE:
Always use "TORX" socket wrench E10 when removing the rear seat.



1. REMOVE REAR SEAT CUSHION COVER PAD (for Bench Reclining Fold Down Seat Type)


    B117740
  1. Hold the front edge of the rear seat cushion and lift it up, as shown in the illustration, to disengage the the 2 rear seat cushion lock hooks.

    NOTICE:
    Hold the area around the rear seat cushion hooks so as to avoid deforming the rear seat cushion frame.

  1. Pass the rear seat inner belt through the slit in the rear seat cushion, disengage the hook between the rear seat cushion and rear seat back, and remove the rear seat cushion.



2. REMOVE REAR SEAT INNER BELT ASSEMBLY LH


    B134904
  1. Remove the bolt and the rear seat inner belt LH.



3. REMOVE REAR SEAT INNER BELT ASSEMBLY RH


    B134909
  1. Remove the bolt and the rear seat inner belt RH.