Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for Hatchback Bench Seat Type)

REAR CENTER SEAT INNER BELT ASSEMBLY (for Hatchback Bench Seat Type) > INSTALLATION

for Preparation Click here


NOTICE:
Always use "TORX" socket wrench E10 when installing the rear seat.



1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY LH


    B134905E01
  1. Install the rear center seat inner belt LH with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    1. Install the anchor plate with the arrow mark facing forward.
    2. Do not place the anchor plate over the location mark area of the floor panel.



2. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY RH


    B134910E01
  1. Install the rear center seat inner belt RH with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    1. Install the anchor plate with the arrow mark facing forward.
    2. Do not place the anchor plate over the location mark area of the floor panel.



3. INSTALL REAR SEAT CUSHION COVER PAD (for Bench Reclining Fold Down Seat Type)


    B117758
  1. Pass the rear seat inner belt through the slit in the rear seat cushion.

  1. Engage the 3 hooks and install the rear seat cushion.

    NOTICE:
    Make sure that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.