Home › BRAKE › PARKING BRAKE › PARKING BRAKE LEVER (for Hatchback)

PARKING BRAKE LEVER (for Hatchback) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


3. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)


C109005E01
  1. Disengage the 6 claws and remove the shifting hole cover.



4. REMOVE CONSOLE BOX COVER REAR


C109006E01
  1. Disengage the 8 claws and remove the console box rear cover.



5. REMOVE CONSOLE BOX CARPET


C109008
  1. Remove the console box carpet.



6. REMOVE REAR CONSOLE BOX ASSEMBLY


C116873
  1. Remove the bolt and disengage the 2 clips to remove the console box.



7. LOOSEN NO. 1 WIRE ADJUSTING NUT


C116905E01
  1. Loosen the lock nut and the adjusting nut.



8. DISCONNECT PARKING BRAKE NO. 3 CABLE ASSEMBLY
  1. Disconnect the parking brake cable from the parking brake equalizer.



9. DISCONNECT PARKING BRAKE NO. 2 CABLE ASSEMBLY
  1. Disconnect the parking brake cable from the parking brake equalizer.



10. REMOVE PARKING BRAKE LEVER
  1. Disconnect the parking brake switch connector.



    C109011
  1. Remove the 3 bolts and remove the parking brake lever.



    C109012
  1. Remove the lock nut and adjusting nut to remove the parking brake pull rod and parking brake equalizer.



11. REMOVE PARKING BRAKE SWITCH


C109013
  1. Remove the screw and remove the parking brake switch.