Home › BRAKE › PARKING BRAKE › PARKING BRAKE LEVER (for Sedan)

PARKING BRAKE LEVER (for Sedan) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


B132316
  1. Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.



3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    B132387
  1. Remove the shift lever knob.



4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B132347
  1. Shift the shift lever into the N position.

  1. Disengage the 5 clips and the claw and remove the upper console panel.



5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B132348
  1. Disengage the 3 clips and 3 claws.

  1. Disconnect the connector and remove the console upper rear panel.



6. REMOVE CONSOLE BOX CARPET


B132346
  1. Remove the console box carpet.



7. REMOVE REAR CONSOLE BOX ASSEMBLY


    B132349
  1. Disconnect the clamp.

  1. Remove the 2 bolts and 2 screws.

  1. Disengage the 4 claws and remove the rear console box.



8. LOOSEN NO. 1 WIRE ADJUSTING NUT


C116905E01
  1. Loosen the lock nut and adjusting nut.



9. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
  1. Disconnect the parking brake cable from the parking brake equalizer.



10. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY
  1. Disconnect the parking brake cable from the parking brake equalizer.



11. REMOVE PARKING BRAKE LEVER
  1. Disconnect the parking brake switch connector.



    C109011
  1. Remove the 3 bolts and remove the parking brake lever.



    C109012
  1. Remove the lock nut and adjusting nut to remove the parking brake pull rod and parking brake equalizer.



12. REMOVE PARKING BRAKE SWITCH


C109013
  1. Remove the screw and remove the parking brake switch.