PARKING BRAKE SYSTEM (for Hatchback) > ADJUSTMENT |
| 1. REMOVE REAR WHEEL |
| 2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE |
![]() |
Provisionally install the 2 hub nuts.
Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.
Using a screwdriver, release the adjuster 12 notches.
Install the hole plug.
| 3. INSTALL REAR WHEEL |
| 4. INSPECT PARKING BRAKE LEVER TRAVEL |
Slowly pull the parking brake lever to the fully applied position, counting the number of clicks.
| 5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
| 6. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle) |
![]() |
Disengage the 6 claws and remove the shifting hole cover.
| 7. REMOVE CONSOLE BOX COVER REAR |
![]() |
Disengage the 8 claws and remove the console box rear cover.
| 8. REMOVE CONSOLE BOX CARPET |
![]() |
Remove the console box carpet.
| 9. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() |
Remove the bolt and disengage the 2 clips to remove the console box.
| 10. ADJUST PARKING BRAKE LEVER TRAVEL |
![]() |
Loosen the lock nut and turn the adjusting nut until the parking brake lever travel is corrected to within the specified range.
Tighten the lock nut.
Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.
Check whether the parking brake drags or not.
When operating the parking brake lever, check that the brake warning light illuminates.
| 11. INSTALL REAR CONSOLE BOX ASSEMBLY |
![]() |
Engage the 2 clips and install the console box with the bolt.
| 12. INSTALL CONSOLE BOX CARPET |
![]() |
Install the console box carpet.
| 13. INSTALL CONSOLE BOX COVER REAR |
![]() |
Engage the 8 claws to install the console box rear cover.
| 14. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle) |
![]() |
Engage the 6 claws to install the shifting hole cover.
| 15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |