Home
›
BODY
›
ENGINE HOOD / DOOR
›
BACK DOOR SUPPORT (for Hatchback)
BACK DOOR SUPPORT (for Hatchback) > REMOVAL
for Preparation
Click here
HINT:
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
1. REMOVE BACK DOOR STAY ASSEMBLY
Using a screwdriver with its wrapped in protective tape, remove the 2 stop rings and stay.
NOTICE:
Do not touch the rod of the stay with gloves, to avoid fibers from adhering.
When foreign matter adheres to the rod, it prevents the rod from moving smoothly and reduces its holding power.
HINT:
Support the back door by hand while removing the door stay.