Home › ENGINE ยท 1NZ-FE › ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL

ACCELERATOR PEDAL > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1 (for RHD)


B108140E02
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove instrument panel undercover No. 1.



3. REMOVE ACCELERATOR PEDAL ASSEMBLY


A115383
  1. Disconnect the accelerator pedal connector.

  1. Remove the 2 bolts and accelerator pedal.

    NOTICE:
    1. Do not drop or strike the accelerator pedal.
    2. Do not disassemble the accelerator pedal.