ACCELERATOR PEDAL > ON-VEHICLE INSPECTION |
| 1. INSPECT ACCELERATOR PEDAL ASSEMBLY |
![]() |
Connect an intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu items: Powertrain / Engine and ECT / Data List / Accelerator Pedal Position No. 1 and Accelerator Pedal Position No. 2.
While the accelerator pedal is depressed and released, check that the values of accelerator pedal position No. 1 and accelerator pedal position No. 2 are within the specification.
| Condition | Specified Condition |
| Accelerator pedal released | 0.5 to 1.1 V |
| Accelerator pedal depressed | 2.6 to 4.5 V |
| Condition | Specified Condition |
| Accelerator pedal released | 1.2 to 2.0 V |
| Accelerator pedal depressed | 3.4 to 5.0 V |