THROTTLE BODY > ON-VEHICLE INSPECTION |
| 1. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY |
Check the throttle control motor operating sounds.
Turn the ignition switch on (IG).
When pressing the accelerator pedal, listen for running sounds of the motor. Make sure no friction noises come from the motor.
![]() |
Check the throttle position sensor.
Connect an intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Push the intelligent tester main switch ON.
Select the following menu items:
Powertrain / Engine and ECT / Data List / Throttle Sensor Position.
Depress the accelerator pedal. When the throttle valve is fully open, check that the value of the "Throttle Sensor Position" is within the specifications.