CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > INSPECTION |
| 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
![]() |
Check the resistance.
Measure the resistance between the terminals.
![]() |
Check the operation.
Connect the positive (+) battery lead to terminal 1 and the negative (-) lead to terminal 2, and check the movement of the valve.
| Condition | Specified Condition |
| Battery positive (+) voltage applied | Valve moves in left arrow direction shown in the illustration |
| Battery positive (+) voltage cut off | Valve moves in right arrow direction shown in the illustration |