Home
›
ENGINE ยท 2NZ-FE
›
ENGINE MECHANICAL
›
TIMING CHAIN
TIMING CHAIN > INSPECTION
for Preparation
Click here
1. INSPECT CHAIN SUB-ASSEMBLY
Using a spring scale, apply 140 N (14.3 kgf, 31.5 lb) to the timing chain and measure its length.
Maximum chain elongation:
123.2 mm (4.850 in.)
If the elongation is greater than the maximum, replace the chain.
HINT:
Perform the same measurement at 3 or more random places and calculate the average length.