Home › ENGINE ยท 2NZ-FE › LUBRICATION › OIL PUMP

OIL PUMP > REPLACEMENT

for Preparation Click here



1. REMOVE OIL PUMP SEAL


A035281
  1. Using a screwdriver with its tip wrapped in protective tape, remove the oil pump seal.



2. INSTALL OIL PUMP SEAL


A037153E05
  1. Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing chain cover edge.

    SST
    09950-60010   (09951-00250, 09951-00410, 09952-06010)
    09950-70010   (09951-07100)

    NOTICE:
    Do not tap the oil seal at an angle.

  1. Apply a light coat of MP grease to the oil pump seal lip.

    NOTICE:
    Keep the lip free of foreign matter.