OUTER MIRROR SWITCH (for Hatchback) > INSPECTION |
| 1. INSPECT OUTER MIRROR SWITCH ASSEMBLY |
![]() |
Check the resistance.
Select L on the left/right adjustment switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| - | OFF | 10 kΩ or higher |
| 4 (VL) - 8 (B) 6 (M+) - 7 (E) | UP | Below 1 Ω |
| 4 (VL) - 7 (E) 6 (M+) - 8 (B) | DOWN | Below 1 Ω |
| 5 (HL) - 8 (B) 6 (M+) - 7 (E) | LEFT | Below 1 Ω |
| 5 (HL) - 7 (E) 6 (M+) - 8 (B) | RIGHT | Below 1 Ω |
Select R on the left/light adjustment switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| - | OFF | 10 kΩ or higher |
| 3 (VR) - 8 (B) 6 (M+) - 7 (E) | UP | Below 1 Ω |
| 3 (VR) - 7 (E) 6 (M+) - 8 (B) | DOWN | Below 1 Ω |
| 2 (HR) - 8 (B) 6 (M+) - 7 (E) | LEFT | Below 1 Ω |
| 2 (HR) - 7 (E) 6 (M+) - 8 (B) | RIGHT | Below 1 Ω |