Home › BODY ELECTRICAL › LIGHTING › FOG LIGHT ASSEMBLY (for Hatchback)

FOG LIGHT ASSEMBLY (for Hatchback) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT FENDER LINER


E117646
  1. Remove the 3 screws and remove the front side of the front fender liner.



3. REMOVE FOG LIGHT ASSEMBLY


B209882
  1. Disconnect the connector.

  1. Remove the 2 screws, then remove the fog light.



    E107960
  1. Turn the fog light bulb, in the direction indicated by the arrow in the illustration, to remove it.