Home › BODY ELECTRICAL › LIGHTING › FOG LIGHT ASSEMBLY (for Sedan)

FOG LIGHT ASSEMBLY (for Sedan) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT FENDER LINER


    E127802
  1. Remove the 3 screws and remove the front side of the front fender liner.



3. REMOVE FOG LIGHT ASSEMBLY


    E127843
  1. Disconnect the connector.

  1. Remove the 3 screws, then remove the fog light.



    E107960
  1. Turn the fog light bulb, in the direction indicated by the arrow in the illustration, to remove it.