Home › BODY ELECTRICAL › LIGHTING › SIDE TURN SIGNAL LIGHT ASSEMBLY (for Hatchback)

SIDE TURN SIGNAL LIGHT ASSEMBLY (for Hatchback) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


E114433
  1. Disengage the 2 claws and disconnect the side turn signal light.

  1. Disconnect the connector and remove the side turn signal light.