Home › BODY ELECTRICAL › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY (for Hatchback)

REAR COMBINATION LIGHT ASSEMBLY (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


E109069
  1. Connect the connector and install the rear combination light socket and wire.



2. INSTALL REAR COMBINATION LIGHT BULB


E108444
  1. Install the rear combination light bulb (tail light bulb) into the socket and wire.



    E108443
  1. Turn the rear combination light socket and wire, in the direction indicated by the arrow in the illustration, to install them.



    E113824
  1. Install the rear combination light bulb (stop light bulb) into the light socket.



    E113823
  1. Turn the rear combination light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.



    E108441
  1. Turn the 2 rear combination light bulbs (turn signal light bulb and back up light bulb), in the direction indicated by the arrows in the illustration, to install them.



    E114435
  1. Engage the 2 claws and install the rear combination light socket and wire.



3. INSTALL REAR COMBINATION LIGHT BODY GASKET


E224172E01
  1. Install a new rear combination light body gasket.



4. INSTALL REAR COMBINATION LIGHT ASSEMBLY


E113819
  1. Install the tail light (rear combination light) assembly onto the vehicle.



    E108436
  1. Connect the connector.

  1. Install the 2 nuts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



5. INSTALL REAR COMBINATION LIGHT COVER


E113818
  1. Engage the 6 claws and install the rear combination light cover.



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }