Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY (for Sedan without Rear Spoiler)

HIGH MOUNTED STOP LIGHT ASSEMBLY (for Sedan without Rear Spoiler) > INSTALLATION

for Preparation Click here



1. INSTALL HIGH MOUNTED STOP LIGHT BULB


    E127793
  1. Install the high mounted stop light bulb into the light socket.

  1. Turn the high mounted stop light bulb socket and bulb, in the directions indicated by the arrow in the illustration, to install them.



2. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY


    E127792
  1. Connect the connector.

  1. Engage the 4 claws and install the high mounted stop light assembly.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }