HIGH MOUNTED STOP LIGHT ASSEMBLY (for Hatchback) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE CENTER STOP LIGHT COVER |
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the 2 rear light covers.
![]() |
Remove the 2 screws.
![]() |
Disengage the 2 claws.
Disconnect the connector and remove the center stop light cover.
| 3. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY |
![]() |
Disengage the 2 claws and remove the high mounted stop light.