Home › BODY ELECTRICAL › LIGHTING › STOP LIGHT SWITCH (for Sedan)

STOP LIGHT SWITCH (for Sedan) > INSTALLATION

for Preparation Click here



1. INSTALL STOP LIGHT SWITCH


    F049043E05
  1. Install the stop light switch into the adjuster until it slightly touches the brake pedal.

    NOTICE:
    Do not depress the brake pedal.




      F049044E08
    1. Make a quarter turn clockwise to install the stop light switch.

      NOTICE:
      Do not depress the brake pedal.

      HINT:
      The turning torque for installing the stop light switch is as below.

      Torque:
      1.5 N*m{ 15 kgf*cm , 13 in.*lbf } or less

  1. Check the stop light switch clearance.

    Stop light switch clearance:
    0.5 to 2.6 mm (0.020 to 0.102 in.)



    E127847
  1. Connect the stop light switch connector to the stop light switch.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }