STOP LIGHT SWITCH (for Hatchback) > INSPECTION |
| 1. INSPECT STOP LIGHT SWITCH |
![]() |
Check the resistance.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Switch pin released | Below 1 Ω |
| 3 - 4 | Switch pin released | 10 kΩ or higher |
| 1 - 2 | Switch pin pushed in | 10 kΩ or higher |
| 3 - 4 | Switch pin pushed in | Below 1 Ω |