Home › BODY ELECTRICAL › LIGHTING › FRONT DOOR COURTESY SWITCH (for Hatchback)

FRONT DOOR COURTESY SWITCH (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT DOOR COURTESY SWITCH


E113843
  1. Connect the connector.

  1. Using "Torx" socket wrench T30, install the front door courtesy switch with the screw.

    Torque:
    3.7 N*m{ 38 kgf*cm , 33 in.*lbf }



2. INSTALL CENTER PILLAR GARNISH LOWER (for 5 Door)


    B114297
  1. Engage the 2 clips and the 2 claws and install the center pillar lower garnish.



3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (for 5 Door)


E113842
  1. Install the rear door opening trim weatherstrip.



4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


E113841E01
  1. Install the front door opening trim weatherstrip.



5. INSTALL REAR DOOR SCUFF PLATE (for 5 Door)

HINT:
Use the same procedure as for the RH side.



6. INSTALL FRONT DOOR SCUFF PLATE (for 5 Door)

HINT:
Use the same procedure as for the RH side.



7. INSTALL FRONT DOOR SCUFF PLATE (for 3 Door)

HINT:
Use the same procedure as for the RH side.



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }