Home › BODY ELECTRICAL › LIGHTING › FRONT DOOR COURTESY SWITCH (for Sedan)

FRONT DOOR COURTESY SWITCH (for Sedan) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT DOOR SCUFF PLATE


    B134764
  1. Disengage the 11 claws and remove the front door scuff plate.



3. REMOVE REAR DOOR SCUFF PLATE


    B134771
  1. Disengage the 7 claws and remove the rear door scuff plate.



4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP


E127714
  1. Remove the front door opening trim weatherstrip.



5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP


E127715
  1. Remove the rear door opening trim weatherstrip.



6. REMOVE CENTER PILLAR GARNISH LOWER


    B134767
  1. Disengage the 3 claws and 2 clips and remove the center pillar lower garnish.



7. REMOVE FRONT DOOR COURTESY SWITCH


E113843
  1. Using "Torx" socket wrench T30, remove the screw.

  1. Disconnect the connector and remove the front door courtesy switch.