Home › BODY ELECTRICAL › LIGHTING › REAR DOOR COURTESY SWITCH (for Sedan)

REAR DOOR COURTESY SWITCH (for Sedan) > INSPECTION

for Preparation Click here



1. INSPECT REAR DOOR COURTESY SWITCH


    E129660E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - Switch body
      ON (Shaft not pressed)
      Below 1 Ω
      1 - Switch body
      OFF (Shaft pressed)
      10 kΩ or higher

      If the result is not as specified, replace the rear door courtesy switch.