Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER MOTOR (for Hatchback)

REAR WIPER MOTOR (for Hatchback) > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


B104993
  1. Using a screwdriver with its tip wrapped in protective tape, slide the handle plate of the back door trim board to disengage it.



    B118076
  1. Disengage the 3 claws and 9 clips and remove the back door trim board.



2. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


E107899
  1. Open the rear wiper arm head cap.



    E107900
  1. Remove the nut and rear wiper arm and blade.



3. REMOVE REAR WIPER MOTOR GROMMET


E107901
  1. Remove the rear wiper motor grommet.



4. REMOVE REAR WIPER MOTOR


B210526E01
  1. Disconnect the connector.

  1. Loosen bolt A.

    NOTICE:
    Do not try to remove the bolt since it is integrated with the motor.

  1. Remove bolt B and the rear wiper motor.