Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER MOTOR (for Hatchback)

WASHER MOTOR (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


E114467
  1. Install the windshield washer motor and pump onto the packing of the washer jar.



2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


E114468
  1. Install the windshield washer jar.



    E114466
  1. Install the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the 2 connectors.

  1. Connect the 2 harness clamps.



3. FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID
  1. Connect the washer hose to the washer motor and pump, and fill the washer jar with washer fluid.



4. INSTALL RH HEADLIGHT ASSEMBLY

HINT:
Use the same procedure as for the LH side.



5. INSTALL FRONT BUMPER COVER


    B114362
  1. Install the 2 clips and the screw grommet.



    B185295
  1. Engage the 6 claws and install the front bumper cover.

  1. Connect the 2 connectors.

    HINT:
    If the vehicle is equipped with fog lights, connect the connector.



    B209559
  1. Install the 7 clips.

  1. Install the 2 screw grommets.

  1. Tighten the 8 screws.



    B185052E01
  1. Remove the protective tape.