Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER MOTOR (for Sedan)

WASHER MOTOR (for Sedan) > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E127114
  1. Install the windshield washer motor and pump onto the packing of the washer jar.



2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    E127115
  1. Install the windshield washer jar.



    E127113
  1. Install the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the connector.

  1. Connect the 2 harness clamps.



3. FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID
  1. Connect the washer hose to the washer motor and pump, and fill the washer jar with washer fluid.



4. INSTALL HEADLIGHT ASSEMBLY RH


    E127125
  1. w/ Headlight leveling:
    Connect the 3 connectors.

  1. w/o Headlight leveling:
    Connect the 2 connectors.

  1. Install the headlight with the 2 screws and the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



5. INSTALL FRONT BUMPER COVER


    B134823
  1. Install the 2 clips and the screw grommet.



    B134801
  1. w/ Fog Light:

    1. Connect the 2 fog light connectors.

    2. Engage the 6 claws and install the front bumper cover.



    B134800
  1. w/o Fog Light:

    1. Engage the 6 claws and install the front bumper cover.



    B134805
  1. Install the 6 clips.

  1. Install the 2 screw grommets.

  1. Tighten the 7 screws and 3 bolts.



    B134799E01
  1. Remove the protective tape.