Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER MOTOR (for Hatchback)

WASHER MOTOR (for Hatchback) > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER COVER


    B185052E01
  1. Apply protective tape as shown in the illustration.



    B185053
  1. Remove the 8 screws.

  1. Remove the 2 screw grommets.

  1. Remove the 7 clips.



    B185054E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 6 claws and remove the front bumper cover.

  1. Disconnect the 2 connectors.

    HINT:
    If the vehicle is equipped with fog lights, disconnect the connectors.



    B114366
  1. Remove the 2 clips and the screw grommet.



2. REMOVE RH HEADLIGHT ASSEMBLY


E107913
  1. Remove the 3 screws.

  1. w/ Headlight leveling:
    Disconnect the 4 connectors, then remove the headlight.

  1. w/o Headlight leveling:
    Disconnect the 3 connectors, then remove the headlight.



3. DRAIN WASHER FLUID
  1. Disconnect the 2 washer hoses from the windshield washer motor and pump, and drain the washer fluid.



4. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


E114466
  1. Disconnect the 2 harness clamps.

  1. Disconnect the 2 connectors.

  1. Remove the 2 bolts.

  1. Remove the windshield washer jar.



5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


E114467
  1. Pull the washer motor and pump out of the packing of the washer jar.