WASHER MOTOR (for Sedan) > REMOVAL |
| 1. REMOVE FRONT BUMPER COVER |
![]() |
Apply protective tape, as shown in the illustration.
![]() |
Remove the 7 screws and 3 bolts.
Remove the 2 screw grommets.
Remove the 6 clips.
![]() |
w/ Fog Light:
Disengage the 6 claws and remove the front bumper cover.
Disconnect the 2 fog light connectors.
![]() |
w/o Fog Light:
Disengage the 6 claws and remove the front bumper cover.
![]() |
Remove the 2 clips and the screw grommet.
| 2. REMOVE HEADLIGHT ASSEMBLY RH |
![]() |
Remove the 2 screws and the bolt.
w/ Headlight leveling:
Disconnect the 3 connectors, then remove the headlight.
w/o Headlight leveling:
Disconnect the 2 connectors, then remove the headlight.
| 3. DRAIN WASHER FLUID |
Disconnect the 2 washer hoses from the windshield washer motor and pump, and drain the washer fluid.
| 4. REMOVE WINDSHIELD WASHER JAR ASSEMBLY |
![]() |
Disconnect the 2 harness clamps.
Disconnect the connector.
Remove the 2 bolts.
Remove the windshield washer jar.
| 5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
![]() |
Pull the washer motor and pump out of the packing of the washer jar.