Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER RUBBER (for Hatchback)

REAR WIPER RUBBER (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL REAR WIPER RUBBER


E123457E01
  1. Install the 2 wiper rubber backing plates onto the wiper rubber.

    NOTICE:
    Install the backing plates facing the correct direction.



    E123458
  1. Insert the rear wiper rubber from the claw position of the middle of the rear wiper blade to the end.



    E123459
  1. After passing the rear wiper rubber through the rear end side claw, allow it to protrude from the rear end stopper and slide it through the front tip side claw.



2. INSTALL REAR WIPER BLADE ASSEMBLY


E123460
  1. Engage the claw and install the wiper blade.