Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW MASTER SWITCH (for Hatchback)

POWER WINDOW MASTER SWITCH (for Hatchback) > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Jam Protection Function)


    B118051E07
  1. for LHD:
    Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

      Standard Resistance:
      Driver switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      Always
      (ON / OFF)
      UP AUTO
      1 (AUTO) - 7 (E)
      18 (U) - 7 (E)
      10 (D) - 15 (B)
      Below 1 Ω
      Always
      (ON / OFF)
      UP MANUAL
      10 (D) - 15 (B)
      18 (U) - 7 (E)
      Below 1 Ω
      Always
      (ON / OFF)
      OFF
      10 (D) - 18 (U)
      15 (B) - 18 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN MANUAL
      10 (D) - 7 (E)
      15 (B) - 18 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN AUTO
      1 (AUTO) - 7 (E)
      10 (D) - 7 (E)
      15 (B) - 18 (U)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Passenger side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      16 (D) - 7 (E)
      12 (U) - 15 (B)
      Below 1 Ω
      OFF
      OFF
      12 (U) - 7 (E)
      16 (D) - 7 (E)
      Below 1 Ω
      OFF
      DOWN
      12 (U) - 7 (E)
      15 (B) - 16 (D)
      Below 1 Ω
      ON
      UP
      12 (U) - 15 (B)
      Below 1 Ω
      ON
      OFF
      12 (U) - 16 (D)
      Below 1 Ω
      ON
      DOWN
      15 (B) - 16 (D)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

  1. for LHD:
    Check the illumination operation.

    1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 6 (LED+)
      Battery negative (-) → Terminal 7 (E)
      Illumination comes on

      If the result is not as specified, replace the power window regulator master switch.



    B118052E05
  1. for RHD:
    Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

      Standard Resistance:
      Driver switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      Always
      (ON / OFF)
      UP AUTO
      18 (AUTO) - 7 (E)
      9 (U) - 7 (E)
      6 (D) - 15 (B)
      Below 1 Ω
      Always
      (ON / OFF)
      UP MANUAL
      6 (D) - 15 (B)
      9 (U) - 7 (E)
      Below 1 Ω
      Always
      (ON / OFF)
      OFF
      6 (D) - 9 (U)
      15 (B) - 9 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN MANUAL
      6 (D) - 7 (E)
      15 (B) - 9 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN AUTO
      18 (AUTO) - 7 (E)
      6 (D) - 7 (E)
      15 (B) - 9 (U)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Passenger side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      10 (D) - 7 (E)
      12 (U) - 15 (B)
      Below 1 Ω
      OFF
      OFF
      12 (U) - 7 (E)
      10 (D) - 7 (E)
      Below 1 Ω
      OFF
      DOWN
      12 (U) - 7 (E)
      15 (B) - 10 (D)
      Below 1 Ω
      ON
      UP
      12 (U) - 15 (B)
      Below 1 Ω
      ON
      OFF
      12 (U) - 10 (D)
      Below 1 Ω
      ON
      DOWN
      15 (B) - 10 (D)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

  1. for RHD:
    Check the illumination operation.

    1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 16 (LED+)
      Battery negative (-) → Terminal 7 (E)
      Illumination comes on

      If the result is not as specified, replace the power window regulator master switch.



2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/o Jam Protection Function)


    B107909E13
  1. for LHD vehicle w/ rear power window:
    Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

      Standard Resistance:
      Driver switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      Always
      (ON / OFF)
      UP
      3 (U) - 6 (B)
      1 (E) - 4 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      OFF
      1 (E) - 3 (U)
      1 (E) - 4 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN MANUAL
      4 (D) - 6 (B)
      1 (E) - 3 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN AUTO
      1 (E) - 3 (U)
      4 (D) - 6 (B)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Passenger side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      6 (B) - 16 (U)
      1 (E) - 15 (D)
      Below 1 Ω
      OFF
      OFF
      1 (E) - 16 (U)
      1 (E) - 15 (D)
      Below 1 Ω
      OFF
      DOWN
      6 (B) - 15 (D)
      1 (E) - 16 (U)
      Below 1 Ω
      ON
      UP
      6 (B) - 16 (U)
      Below 1 Ω
      ON
      UP
      1 (E) - 15 (D)
      10 kΩ or higher
      ON
      OFF
      15 (D) - 16 (U)
      Below 1 Ω
      ON
      DOWN
      6 (B) - 15 (D)
      Below 1 Ω
      ON
      DOWN
      1 (E) - 15 (D)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Rear LH side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      6 (B) - 12 (U)
      1 (E) - 13 (D)
      Below 1 Ω
      OFF
      OFF
      1 (E) - 12 (U)
      1 (E) - 13 (D)
      Below 1 Ω
      OFF
      DOWN
      6 (B) - 13 (D)
      1 (E) - 12 (U)
      Below 1 Ω
      ON
      UP
      6 (B) - 12 (U)
      Below 1 Ω
      ON
      UP
      1 (E) - 13 (D)
      10 kΩ or higher
      ON
      OFF
      12 (U) - 13 (D)
      Below 1 Ω
      ON
      DOWN
      6 (B) - 13 (D)
      Below 1 Ω
      ON
      DOWN
      1 (E) - 12 (U)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Rear RH side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      6 (B) - 10 (U)
      1 (E) - 18 (D)
      Below 1 Ω
      OFF
      OFF
      1 (E) - 10 (U)
      1 (E) - 18 (D)
      Below 1 Ω
      OFF
      DOWN
      6 (B) - 18 (D)
      1 (E) - 10 (U)
      Below 1 Ω
      ON
      UP
      6 (B) - 10 (U)
      Below 1 Ω
      ON
      UP
      1 (E) - 18 (D)
      10 kΩ or higher
      ON
      OFF
      10 (U) - 18 (D)
      Below 1 Ω
      ON
      DOWN
      6 (B) - 18 (D)
      Below 1 Ω
      ON
      DOWN
      1 (E) - 10 (U)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

  1. for LHD vehicle w/ rear power window:
    Check the illumination operation.

    1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 6 (B)
      Battery negative (-) → Terminal 1 (E)
      Illumination comes on

      If the result is not as specified, replace the power window regulator master switch.



    B118051E08
  1. for LHD vehicle w/o rear power window:
    Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

      Standard Resistance:
      Driver switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      Always
      (ON / OFF)
      UP
      15 (B) - 10 (U)
      7 (E) - 12 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      OFF
      7 (E) - 10 (U)
      7 (E) - 12 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN MANUAL
      12 (D) - 15 (B)
      7 (E) - 10 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN AUTO
      12 (D) - 15 (B)
      7 (E) - 10 (U)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Passenger side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      15 (B) - 16 (U)
      7 (E) - 18 (D)
      Below 1 Ω
      OFF
      OFF
      7 (E) - 16 (U)
      7 (E) - 18 (D)
      Below 1 Ω
      OFF
      DOWN
      15 (B) - 18 (D)
      7 (E) - 16 (U)
      Below 1 Ω
      ON
      UP
      15 (B) - 16 (U)
      Below 1 Ω
      ON
      UP
      7 (E) - 18 (D)
      10 kΩ or higher
      ON
      OFF
      16 (U) - 18 (D)
      Below 1 Ω
      ON
      DOWN
      15 (B) - 18 (D)
      Below 1 Ω
      ON
      DOWN
      7 (E) - 16 (U)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

  1. for LHD vehicle w/o rear power window:
    Check the illumination operation.

    1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 15 (B)
      Battery negative (-) → Terminal 7 (E)
      Illumination comes on

      If the result is not as specified, replace the power window regulator master switch.



    B107910E06
  1. for RHD vehicle w/ rear power window:
    Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

      Standard Resistance:
      Driver switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      Always
      (ON / OFF)
      UP
      4 (U) - 6 (B)
      9 (E) - 3 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      OFF
      9 (E) - 4 (U)
      9 (E) - 3 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN MANUAL
      3 (D) - 6 (B)
      9 (E) - 4 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN AUTO
      9 (E) - 4 (U)
      3 (D) - 6 (B)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Passenger side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      6 (B) - 12(U)
      9 (E) - 13 (D)
      Below 1 Ω
      OFF
      OFF
      9 (E) - 12(U)
      9 (E) - 13 (D)
      Below 1 Ω
      OFF
      DOWN
      6 (B) - 13 (D)
      9 (E) - 12(U)
      Below 1 Ω
      ON
      UP
      6 (B) - 12(U)
      Below 1 Ω
      ON
      UP
      9 (E) - 13 (D)
      10 kΩ or higher
      ON
      OFF
      13 (D) - 12(U)
      Below 1 Ω
      ON
      DOWN
      6 (B) - 13 (D)
      Below 1 Ω
      ON
      DOWN
      9 (E) - 12 (U)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Rear LH side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      6 (B) - 18 (U)
      9 (E) - 10 D)
      Below 1 Ω
      OFF
      OFF
      9 (E) - 18 (U)
      9 (E) - 10 (D)
      Below 1 Ω
      OFF
      DOWN
      6 (B) - 10 (D)
      9 (E) - 18 (U)
      Below 1 Ω
      ON
      UP
      6 (B) - 18 (U)
      Below 1 Ω
      ON
      UP
      9 (E) - 10 (D)
      10 kΩ or higher
      ON
      OFF
      18 (U) - 10 (D)
      Below 1 Ω
      ON
      DOWN
      6 (B) - 10 (D)
      Below 1 Ω
      ON
      DOWN
      9 (E) - 18 (U)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Rear RH side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      6 (B) - 16 (U)
      9 (E) - 15 (D)
      Below 1 Ω
      OFF
      OFF
      9 (E) - 16 (U)
      9 (E) - 15 (D)
      Below 1 Ω
      OFF
      DOWN
      6 (B) - 15 (D)
      9 (E) - 16 (U)
      Below 1 Ω
      ON
      UP
      6 (B) - 16 (U)
      Below 1 Ω
      ON
      UP
      9 (E) - 15 (D)
      10 kΩ or higher
      ON
      OFF
      16 (U) - 15 (D)
      Below 1 Ω
      ON
      DOWN
      6 (B) - 15 (D)
      Below 1 Ω
      ON
      DOWN
      9 (E) - 16 (U)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

  1. for RHD vehicle w/ rear power window:
    Check the illumination operation.

    1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 6 (B)
      Battery negative (-) → Terminal 9 (E)
      Illumination comes on

      If the result is not as specified, replace the power window regulator master switch.



    B118052E06
  1. for RHD vehicle w/o rear power window:
    Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

      Standard Resistance:
      Driver switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      Always
      (ON / OFF)
      UP
      15 (B) - 18 (U)
      7 (E) - 16 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      OFF
      7 (E) - 18 (U)
      7 (E) - 16 (D)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN MANUAL
      16 (D) - 15 (B)
      7 (E) - 18 (U)
      Below 1 Ω
      Always
      (ON / OFF)
      DOWN AUTO
      16 (D) - 15 (B)
      7 (E) - 18 (U)
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.

      Standard Resistance:
      Passenger side switch:

      Window Lock Switch Condition
      Power Window Switch Condition
      Tester Connection
      Specified Condition
      OFF
      UP
      15 (B) - 12 (U)
      7 (E) - 10 (D)
      Below 1 Ω
      OFF
      OFF
      7 (E) - 12 (U)
      7 (E) - 10 (D)
      Below 1 Ω
      OFF
      DOWN
      15 (B) - 10 (D)
      7 (E) - 12 (U)
      Below 1 Ω
      ON
      UP
      15 (B) - 12 (U)
      Below 1 Ω
      ON
      UP
      7 (E) - 10 (D)
      10 kΩ or higher
      ON
      OFF
      12 (U) - 10 (D)
      Below 1 Ω
      ON
      DOWN
      15 (B) - 10 (D)
      Below 1 Ω
      ON
      DOWN
      7 (E) - 12 (U)
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

  1. for RHD vehicle w/o rear power window:
    Check the illumination operation.

    1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 15 (B)
      Battery negative (-) → Terminal 7 (E)
      Illumination comes on

      If the result is not as specified, replace the power window regulator master switch.