OIL FILTER > REPLACEMENT |
| 1. DRAIN ENGINE OIL |
Remove the oil pan drain plug and drain the engine oil.
Clean the oil pan drain plug and install it with a new gasket.
| 2. REMOVE OIL FILTER SUB-ASSEMBLY |
![]() |
Using SST, remove the oil filter.
| 3. INSTALL OIL FILTER SUB-ASSEMBLY |
Check and clean the oil filter installation surface.
Apply clean engine oil to the gasket of a new oil filter.
![]() |
Gently screw the oil filter into place, then tighten it until the gasket comes into contact with the seat.
Using SST, tighten the oil filter.
Depending on the work space available, choose from the following.
If enough space is available, use a torque wrench to tighten the oil filter.
| 4. ADD ENGINE OIL |
Fill with new engine oil.
| Item | Capacity |
| With oil filter change | 3.7 liters (3.9 US qts, 3.4 lmp. qts) |
| Without oil filter change | 3.4 liters (3.6 US qts, 3.0 lmp. qts) |
| Dry fill | 4.1 liters (4.3 US qts, 3.8 lmp. qts) |
| 5. CHECK FOR ENGINE OIL LEAKAGE |
| 6. CHECK ENGINE OIL LEVEL |