BACK DOOR (for Hatchback) > ADJUSTMENT |

| 1. INSPECT BACK DOOR |
Check that the clearance measurements are within the standard ranges.

| Area | Measurement | Area | Measurement |
| A | 4.5 to 7.5 mm (0.177 to 0.295 in.) | F | -1.5 to 1.5 mm (-0.059 to 0.059 in.) |
| B | -0.5 to 2.5 mm (-0.020 to 0.098 in.) | G | 3.05 to 7.05 mm (0.120 to 0.278 in.) |
| C | 4.5 to 7.5mm (0.177 to 0.295 in.) | H | -1.5 to 1.5 mm (-0.059 to 0.059 in.) |
| D | -0.6 to 2.4 mm (-0.024 to 0.094 in.) | I | 4.05 to 8.05 mm (0.159 to 0.317 in.) |
| E | 3.6 to 6.6 mm (0.142 to 0.260 in.) | J | 4.15 to 8.15 mm (0.163 to 0.321 in.) |
| 2. ADJUST BACK DOOR |
![]() |
Adjust the door position.
Horizontally and vertically adjust the door by loosening the door side hinge bolts.
![]() |
Adjust the striker position.
Adjust the striker position by slightly loosening the striker mounting bolts and hitting the striker with a plastic hammer.
Tighten the striker mounting bolts after the adjustment.