Home › TRANSMISSION ยท CLUTCH › CLUTCH MASTER CYLINDER (for Hatchback RHD)

CLUTCH MASTER CYLINDER (for Hatchback RHD) > REMOVAL

for Preparation Click here



1. DRAIN BRAKE FLUID


2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH (w/ Instrument Panel Under Cover)


    B114572
  1. Remove the 2 screws.

  1. Disengage the 3 claws and remove the instrument panel under cover.



3. REMOVE CLUTCH RESERVOIR TUBE


C118343
  1. Loosen the clip and remove the clutch reservoir tube from the clutch master cylinder

    HINT:
    Use a container to collect the fluid.



4. REMOVE CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE


C118344
  1. Using a union nut wrench 10 mm, disconnect the flexible hose tube.

    HINT:
    Use a container to collect the fluid.



5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


C106350
  1. Remove the spring and clip and remove the push rod clevis pin.

  1. Remove the 2 nuts and the master cylinder.



6. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS


C125988E01
  1. Measure the dimension A as shown in the illustration before loosening the lock nut.

  1. Loosen the lock nut and remove the push rod clevis.

  1. Remove the lock nut.