Home › TRANSMISSION ยท CLUTCH › CLUTCH MASTER CYLINDER (for Sedan RHD)

CLUTCH MASTER CYLINDER (for Sedan RHD) > REMOVAL

for Preparation Click here



1. DRAIN BRAKE FLUID


2. REMOVE CLUTCH RESERVOIR TUBE


C118343
  1. Loosen the clip and remove the clutch reservoir tube from the clutch master cylinder .

    HINT:
    Use container to collect the fluid.



3. REMOVE CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE


C118344
  1. Using a union nut wrench 10 mm, disconnect the flexible hose tube.

    HINT:
    Use a container to collect the fluid.



4. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


C106350
  1. Remove the spring and clip and remove the push rod clevis pin.

  1. Remove the 2 nuts and the master cylinder.



5. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS


C125988E01
  1. Measure the dimension A as shown in the illustration before loosening the lock nut.

  1. Loosen the lock nut and remove the push rod clevis.

  1. Remove the lock nut.