Home › BODY › EXTERIOR › FRONT BUMPER (for Sedan)

FRONT BUMPER (for Sedan) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT BUMPER COVER


    B134799E01
  1. Apply protective tape, as shown in the illustration.



    B134803
  1. Remove the 7 screws and 3 bolts.

  1. Remove the 2 screw grommets.

  1. Remove the 6 clips.



    B134801
  1. w/ Fog Light:

    1. Disengage the 6 claws and remove the front bumper cover.

    2. Disconnect the 2 fog light connectors.



    B134800
  1. w/o Fog Light:

    1. Disengage the 6 claws and remove the front bumper cover.



    B134823
  1. Remove the 2 clips and the screw grommet.



3. REMOVE FRONT BUMPER SIDE RETAINER LH


    B134807
  1. Remove the screw and the bolt.

  1. Disengage the 2 claws and remove the front bumper side retainer.



4. REMOVE FRONT BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



5. REMOVE RADIATOR SUPPORT UPPER ABSORBER


    B134808
  1. Using a screwdriver, disengage the 6 claws and remove the radiator support upper absorber.



6. REMOVE THERMISTOR ASSEMBLY (w/ Air Conditioning System)


    B134809
  1. Remove the 2 clamps and the thermistor.



7. REMOVE RADIATOR SIDE AIR SEAL LH


    B138500
  1. for G. C. C. Countries:

    1. w/o Air Conditioning System (LH Side Only):

      1. Remove the clamp.



    2. B134811
    3. Disengage the 4 claws and remove the radiator side air seal.



    B134810
  1. except G. C. C. Countries:

    1. Disengage the 2 claws and remove the radiator side air seal.



8. REMOVE RADIATOR SIDE AIR SEAL RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE RADIATOR SUPPORT EXTENSION LH (w/ Radiator Support Extension)


    B138499
  1. w/o Air Conditioning System (LH Side Only):

    1. Remove the clamp.



    B134812
  1. Disengage the 2 claws and remove the radiator extension.



10. REMOVE RADIATOR SUPPORT EXTENSION RH (w/ Radiator Support Extension)

HINT:
Use the same procedure as for the LH side.



11. REMOVE NO. 2 ENGINE ROOM WIRE


    B134815
  1. w/ Fog Light:

    1. Using a clip remover, remove the 7 clamps and the No. 2 engine room wire.



    B134814
  1. w/o Fog Light:

    1. Using a clip remover, remove the 6 clamps and the No. 2 engine room wire.



12. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    B134817
  1. for G. C. C. Countries:

    1. Remove the 6 bolts, 4 nuts and the front bumper reinforcement.



    B134816
  1. except G. C. C. Countries:

    1. Remove the 6 bolts, 4 nuts and the front bumper reinforcement.



13. REMOVE FRONT BUMPER STONE DEFLECTOR BRACKET


B134818

HINT:
Use the same procedure for both sides.

  1. Remove the 2 nuts and the front bumper stone deflector bracket.



14. REMOVE HEADLIGHT ASSEMBLY

HINT:
Use the same procedure as for the RH side .



15. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    B134819
  1. Remove the 2 bolts and windshield washer jar.



16. REMOVE FRONT BUMPER ARM SUB-ASSEMBLY LH

HINT:
Use the same procedure as for the LH side.



17. REMOVE FRONT BUMPER ARM SUB-ASSEMBLY RH


    B134820
  1. Remove the 4 bolts and the front bumper arm.