Home › BODY › EXTERIOR › FRONT PILLAR UPPER COVER (for Hatchback)

FRONT PILLAR UPPER COVER (for Hatchback) > REMOVAL

for Preparation Click here


HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.



1. REMOVE FRONT PILLAR UPPER COVER


    B114408E01
  1. Apply protective tape to the body panel in the area around the front pillar upper cover.



    B114409E01
  1. Using a moulding remover, disengage the 2 claws and the clip and remove the front pillar upper cover.