Home › BODY › EXTERIOR › FRONT PILLAR UPPER COVER (for Sedan)

FRONT PILLAR UPPER COVER (for Sedan) > REMOVAL

for Preparation Click here


HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.



1. REMOVE FRONT PILLAR UPPER COVER


    B134846E01
  1. Apply protective tape, as shown in the illustration.



    B134847
  1. Using a moulding remover, disengage the 2 clips and claw and remove the front pillar upper cover.