Home › BODY › EXTERIOR › REAR BUMPER (for Hatchback)

REAR BUMPER (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH (w/ Rear Bumper Arm)


    B114631
  1. Install the rear bumper arm with the 3 bolts.

    Torque:
    19 N*m{ 195 kgf*cm , 14 ft.*lbf }



2. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH (w/ Rear Bumper Arm)

HINT:
Use the same procedure as for the LH side.



3. INSTALL REAR BUMPER REINFORCEMENT (w/o Rear Bumper Arm)


    B114391
  1. Install the rear bumper reinforcement with the 6 bolts.

    Torque:
    19 N*m{ 195 kgf*cm , 14 ft.*lbf }



4. INSTALL REAR BUMPER REINFORCEMENT (w/ Rear Bumper Arm)


    B114620
  1. Install the rear bumper reinforcement with the 4 nuts.

    Torque:
    19 N*m{ 195 kgf*cm , 14 ft.*lbf }



5. INSTALL REAR BUMPER SIDE RETAINER LH


    B114390
  1. Engage the 2 claws and install the rear bumper side retainer.

  1. Tighten the screw.



6. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



7. INSTALL REAR BUMPER COVER


    B185046
  1. Connect the license plate light connector.

  1. Engage the 12 claws and install the rear bumper.



    B185035
  1. Tighten the 2 bolts.

  1. Install the 2 clips.



    B185034E01
  1. Remove the protective tape.



8. INSTALL REAR BUMPER SIDE SEAL LH


    B185033
  1. Install the rear bumper side seal with the 2 clips.



9. INSTALL REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure as for the LH side.