Home › BODY › EXTERIOR › REAR BUMPER (for Sedan)

REAR BUMPER (for Sedan) > INSTALLATION

for Preparation Click here



1. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH


    B134842
  1. for G. C. C. Countries:

    1. Install the rear bumper arm with the 3 bolts.

      Torque:
      19 N*m{ 195 kgf*cm , 14 ft.*lbf }



    B134841
  1. except G. C. C. Countries:

    1. Install the rear bumper arm with the 3 bolts.

      Torque:
      19 N*m{ 195 kgf*cm , 14 ft.*lbf }



2. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL REAR BUMPER REINFORCEMENT (w/ Rear Bumper Reinforcement)


    B134840
  1. Install the rear bumper reinforcement with the 4 nuts.

    Torque:
    19 N*m{ 195 kgf*cm , 14 ft.*lbf }



4. INSTALL REAR BUMPER SIDE SUPPORT LH


    B134838
  1. Engage the 2 claws and install the rear bumper side support.

  1. Tighten the screw.



5. INSTALL REAR BUMPER SIDE SUPPORT RH

HINT:
Use the same procedure as for the LH side.



6. INSTALL REAR BUMPER SIDE RETAINER LH


    B134837
  1. Engage the 3 claws and install the rear bumper side retainer.

  1. Tighten the screw.

  1. Install the clip.



7. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



8. INSTALL REAR BUMPER COVER


    B138620
  1. Engage the 18 claws and install the rear bumper cover.



    B134834
  1. Tighten the 2 bolts and the 2 screws.

  1. Install the 2 clips.



    B134833E01
  1. Remove the protective tape.



9. INSTALL REAR BUMPER SIDE SEAL LH


    B134832
  1. Install the rear bumper side seal with the 3 clips.



10. INSTALL REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure as for the LH side.