Home › BODY › EXTERIOR › NO. 3 BLACK OUT TAPE (for Hatchback)

NO. 3 BLACK OUT TAPE (for Hatchback) > INSTALLATION

for Preparation Click here


HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.



1. INSTALL NO. 3 BLACK OUT TAPE
  1. Application precautions .

  1. Clean the attachment surface (Using an infrared light) .

  1. Clean the attachment surface (Using a tape removal disc) .



  1. Apply new No. 3 black out tape to the positions shown in the illustration.


    B114640E01

    Installation position:
    Mark
    Measurement (along surface)
    a
    +-1 mm (+-0.039 in.)
    b
    4 mm or more (0.157 in. or more)
    c
    +-1 mm (+-0.039 in.)