Home › BODY › EXTERIOR › NO. 3 BLACK OUT TAPE (for Sedan)

NO. 3 BLACK OUT TAPE (for Sedan) > INSTALLATION

for Preparation Click here


HINT:
The procedure described below is for the LH side. Use the same procedure for the RH and LH sides, unless otherwise specified.



1. INSTALL NO. 3 BLACK OUT TAPE
  1. Application precautions .

  1. Clean the attachment surface (Using an infrared light) .

  1. Clean the attachment surface (Using a tape removal disc) .



  1. Apply new No. 1 black out tape to the positions shown in the illustration.


    B134889E01

    Installation position:
    Mark
    Measurement (along surface)
    a
    -1 to 1 mm (-0.039 to 0.039 in.)
    b
    11 to 13 mm (0.433 to 0.512 in.)
    c
    10 to 12 mm (0.394 to 0.472 in.)