METER / GAUGE SYSTEM (for Sedan) > Tachometer Malfunction |

| 1.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (TACHOMETER) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON and turn the tester on.
Perform the Active Test according to the prompts displayed on the tester.
| Item | Test Details | Diagnostic Note |
| Tachometer Operation | 0 rpm / 1,000 rpm / 2,000 rpm / 3,000 rpm / 4,000 rpm / 5,000 rpm / 6,000 rpm / 7,000 rpm | - |
|
| ||||
| OK | |
| 2.READ VALUE USING INTELLIGENT TESTER (ENGINE RPM) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON and turn the tester on.
Read the Data List according to the prompts displayed on the tester.
| Item | Measurement Item/Range (Display) | Normal Condition | Diagnostic Note |
| Engine Rpm | Engine speed / Min.: 0 rpm, Max.: 12,750 rpm | Approximately same as actual engine speed (When engine is running) | - |
|
| ||||
| OK | ||
| ||