Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING SYSTEM

DTC    B1499/99    Multiplex Communication Circuit

for Preparation Click here


DESCRIPTION

The air conditioner amplifier communicates data with the ECM and combination meter assembly through the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
B1499/99
Open in CAN communication line
  1. Air conditioning amplifier
  2. ECM
  3. Combination meter assembly
  4. CAN communication line

WIRING DIAGRAM


E120908E01


INSPECTION PROCEDURE

1.CHECK DTC OUTPUT
  1. Clear the DTC.

    1. Connect an intelligent tester to the DLC3 with the ignition switch off.

    2. Turn the ignition switch on (IG) and turn the intelligent tester ON.

    3. Clear the DTC by following the prompts on the tester screen.

      HINT:
      Refer to the intelligent tester operator's manual for further details.

  1. Read the DTC.

    1. Connect an intelligent tester to the DLC3 with the ignition switch off.

    2. Turn the ignition switch on (IG) and turn the intelligent tester ON.

    3. Read the DTC by following the prompts on the tester screen.

      HINT:
      Refer to the intelligent tester operator's manual for further details.


      Result:

      Result
      Proceed to
      DTC (B1499/99) is output
      A
      DTC (B1499/99) is not output
      B



B
SYSTEM IS OK
A

GO TO CAN COMMUNICATION SYSTEM