Home › BODY ELECTRICAL › LIGHTING › LIGHTING SYSTEM

LIGHTING SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK MAIN BODY ECU

E114510E06


B108641E47

  1. Disconnect the 4B and 4E main body ECU (vehicle rear side) connectors.

  2. Measure the voltages of the wire harness side connectors.

    Standard voltage: 
    Symbols (Terminals No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    BECU (4B-30) - GND1 (4E-17)
    L - W-B
    Battery
    (Power supply)
    Always
    10 to 14 V
    GND1 (4E-17) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 V
    If the result is not as specified, there may be a malfunction in the wire harness.

  3. Reconnect the main body ECU (vehicle rear side) connectors.

  4. Measure the voltages of the wire harness side connectors.

    Standard voltage: 
    Symbols (Terminals No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    DCTY (4A-21) - Body ground
    R - Body ground
    Driver door courtesy switch input
    Driver door closed
    10 to 14 V
    DCTY (4A-21) - Body ground
    R - Body ground
    Driver door courtesy switch input
    Driver door open
    0 V
    PCTY (4A-24) - Body ground
    L - Body ground
    Front passenger door courtesy switch input
    Passenger door closed
    10 to 14 V
    PCTY (4A-24) - Body ground
    L - Body ground
    Front passenger door courtesy switch input
    Passenger door open
    0 V
    RRCY (4A-20)*1 - Body ground
    L - Body ground
    Rear RH door courtesy switch input
    Rear RH door closed
    10 to 14 V
    RRCY (4A-20)*1 - Body ground
    L - Body ground
    Rear RH door courtesy switch input
    Rear RH door open
    0 V
    RRCY (4A-5)*1 - Body ground
    G - Body ground
    Rear LH door courtesy switch input
    Rear LH door closed
    10 to 14 V
    RRCY (4A-5)*1 - Body ground
    G - Body ground
    Rear LH door courtesy switch input
    Rear LH door open
    0 V
    BCTY (4A-7)*2 - Body ground
    SB- Body ground
    Back door courtesy switch input
    Back door closed
    10 to 14 V
    BCTY (4A-7)*2 - Body ground
    SB- Body ground
    Back door courtesy switch input
    Back door open
    0 V
    BCTY (4A-7)*3 - Body ground
    SB- Body ground
    Luggage compartment door courtesy switch input
    Luggage compartment door closed
    10 to 14 V
    BCTY (4A-7)*3 - Body ground
    SB- Body ground
    Luggage compartment door courtesy switch input
    Luggage compartment door open
    0 V
    *1: 5 Door
    *2: Hatchback
    *3: Sedan
    If the result is not as specified, there may be a malfunction on the wire harness side.