Home › BODY ELECTRICAL › HORN › HORN RELAY (for Hatchback)

HORN RELAY (for Hatchback) > INSPECTION

for Preparation Click here



1. INSPECT INTEGRATION RELAY (Built in Horn Relay)


    B114449E01
  1. Check the resistance.

    1. Remove the horn fuse.

    2. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      A8 - T6
      10 kΩ or higher
      Below 1 Ω
      (Battery voltage applied to terminals A7 and T6)

      If the result is not as specified, replace the integration relay.