Home › BODY ELECTRICAL › HORN › LOW PITCHED HORN (for Hatchback)

LOW PITCHED HORN (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL LOW PITCHED HORN ASSEMBLY


    B114452
  1. Install the low pitched horn with the bolt.

    Torque:
    19.5 N*m{ 200 kgf*cm , 14 ft.*lbf }

  1. Connect the low pitched horn connector.



2. INSTALL FRONT BUMPER COVER


    B114362
  1. Install the 2 clips and the screw grommet.



    B185295
  1. Engage the 6 claws and install the front bumper cover.

  1. Connect the 2 connectors.

    HINT:
    If the vehicle is equipped with fog lights, connect the connector.



    B209559
  1. Install the 7 clips.

  1. Install the 2 screw grommets.

  1. Tighten the 8 screws.



    B185052E01
  1. Remove the protective tape.