Home › BODY ELECTRICAL › HORN › LOW PITCHED HORN (for Hatchback)

LOW PITCHED HORN (for Hatchback) > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER COVER


    B185052E01
  1. Apply protective tape as shown in the illustration.



    B185053
  1. Remove the 8 screws.

  1. Remove the 2 screw grommets.

  1. Remove the 7 clips.



    B185054E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 6 claws and remove the front bumper cover.

  1. Disconnect the 2 connectors.

    HINT:
    If the vehicle is equipped with fog lights, disconnect the connectors.



    B114366
  1. Remove the 2 clips and the screw grommet.



2. REMOVE LOW PITCHED HORN ASSEMBLY


    B114452
  1. Disconnect the low pitched horn connector.

  1. Remove the bolt and the low pitched horn.